Tycon Systems MPPT Wi-Fi Remote Monitor Controller [TP-SC-WIFI]

Tycon Systems MPPT Wi-Fi Remote Monitor Controller [TP-SC-WIFI]The Tycon Solar TP SC WiFi wireless adapter is compatible with the following Tycon MPPT solar controllers: TP SC24 30N MPPT, TP SC24 60N MPPT, and TP SC48 60P MPPT. It connects to either of the two RS485 modbus serial ports included on the MPPT solar controllers. It is powered by the RS485 port so no external power supply is required. Using a mobile phone with our free Android or IOS Mobile App, a technician can access current and historical readings

The Tycon Solar TP-SC-WiFi wireless adapter is compatible with the following Tycon MPPT solar controllers: TP-SC24-30N-MPPT, TP-SC24-60N-MPPT, and TP-SC48-60P-MPPT. It connects to either of the two RS485 modbus serial ports included on the MPPT solar controllers. It is powered by the RS485 port so no external power supply is required.Using a mobile phone with our free Android or IOS Mobile App, a technician can access current and historical readings as well as configure the MPPT solar controllers and control the load on/off manually.The TP-SC-WiFi must be connected to the same 2.4GHz WiFi access point as the mobile phone in order to make an initial connection. After the initial setup, as long as both the Cloud-Box-M2 and mobile phone have internet access, the status can be monitored remotely.

Applications

• Tycon TP-SC24-30N-MPPT, TP-SC24-60N-MPPT & TP-SC48- 60P-MPPT Solar Charge Controllers

• Remote monitoring and control

Product Features

• Provides Connectivity up to 100m range

• Designed for Select Tycon TP-SC MPPT Solar Charge Controllers

• No External Power Source Required

• Water Resistant, Industrial Temperature Range

Product Specifications

• Input Voltage: 3.3V

• Standby Power Consumption: 0.05W

• Operating Power Consumption: 60mA, 0.2W

• RF Transmit Power 14 ~ 20dBm

• Communication Frequency: 802.11b/g/n 2.4GHz

• Communication Distance: <100m (300’) with good LOS

LED Function:

• Power LED = Green = Power On• Link LED = Blue     

• Steady On, Flash Off every 5 sec – Connected     

• Double Flash – Waiting for Network Configuration     

• Continuous Flash – Trying to Connect

• Button Function     

• Reset – Press momentarily to restart the module     

• Setup – Hold for 6 secs to reset network config.

• Communication Mode: RS485

• Connector Type: RJ45

• Cable Length: 1.4m (56”)

• Environmental Protection: IP62

• Certifications: CE, RoHS

• Operating Temp / Humidity: -40°C to 80°C (-40°F to 176°F) / <90%RH

• Warranty: 3 years

Product Includes

(1) Wi-Fi Remote Monitor Controller