Receiver Hitch, Front 2" - 2015 and Newer Polaris RZR XP 1000, XP 4 1000, XP Turbo, XP 4 Turbo, 900 Trail, 900 XC, 1000 S and 1000 S 4FRONT 2" RECEIVER HITCH Front tow point for maximum maneuverability Great for mounting accessories or as a tie down recovery point Heavy duty, frame mount design for superior strength 3 16" and 1 4" steel construction throughout Receiver tube with 1 2" reinforcing collar will not bend or deform Durable black powdercoat finish Complete, bolt on kit installs easily in about 45 minutes Available for: 2015 & newer Polaris RZR XP 1000, XP 4 1000, XP Turbo

FRONT 2" RECEIVER HITCH

Front tow point for maximum maneuverability
Great for mounting accessories or as a tie-down/recovery point

• Heavy duty, frame-mount design for superior strength
• 3/16" and 1/4" steel construction throughout
• Receiver tube with 1/2" reinforcing collar will not bend or deform
• Durable black powdercoat finish
• Complete, bolt-on kit installs easily in about 45 minutes
• Available for:
  2015 & newer Polaris RZR XP 1000, XP-4 1000, XP Turbo and XP-4 Turbo
  2015 & newer Polaris RZR 900 Trail, 900 XC, 900-S, 900-S4, 1000-S and 1000-S4
• Does NOT fit 2014 RZR XP 1000 or XP-4 1000
• Does NOT fit RZR XP Turbo-S (72" wide model)
• Does NOT fit any RZR equipped with a winch
• Be sure to verify fitment with any front bumpers
  before purchasing - see notes below
• Made in USA

This hitch is designed for long-term durability, featuring heavy-duty designs and construction. Whether you are moving a trailer, mounting an accessory using a 2" receiver mount or using the hitch for recovery or as a tie-down point, a Thunderhawk hitch will perform. Thunderhawk Performance has designed this hitch to fit the 2015 & newer Polaris RZR XP 1000 and RZR XP Turbo models, as well as the 2015 & newer RZR 900 and RZR 1000-S models. This hitch does NOT fit 2014 RZR XP1000 models. This hitch does NOT fit the RZR XP Turbo-S (72" wide model), as the frame is different on the XP Turbo-S. 2019 & newer models will require minor trimming of the front bumper cover plastic for clearance around the hitch mounting plate.

In 2015, Polaris changed the front suspension mount bracket on the front of the RZR frame (where the bumper mounting tabs are located). To provide the necessary strength a new multi-piece upper hitch mounting system for the PZ2508 that utilizes a gusseted brace to tie the main hitch plate and the updated front suspension mount bracket back to the mainframe rails. This gusseted upper hitch mounting brace (included in the PZ2508 kit) also functions as a bumper brace and strengthens the bumper mounting tabs by tying them directly to the frame to strengthen the bumper mounts and resist bending. The bottom of this front receiver hitch is bolted directly to the frame, behind the front bumper plastic.

This front 2" receiver hitch features 3/16" & 1/4" steel construction throughout and is mounted directly to the frame for unsurpassed strength. These receiver hitches also feature an automotive-grade, reinforced receiver tubes for strength, durability, and proper fitment with your towing accessories. This front receiver hitch installs easily in about 45 minutes using common hand tools. This is a complete kit; including the receiver hitch assembly, upper mounting braces, all necessary hardware and illustrated instructions. The upper mounting brace included in this kit serves the same function as Thunderhawk's PH7302 bumper brace, which eliminates the need to buy the PH7302 when adding a front bumper. The PZ2508 front receiver hitch features a durable black powder-coat finish and the mounting braces & hardware are zinc-plated to resist rust and stand up to rough off-road use. This front receiver hitch does NOT fit vehicles equipped with a winch and fits only with some front bumpers (see notes below). The tongue weight rating for this hitch is 125 lbs, and this hitch is NOT designed for snow-plow mounting. As with all Thunderhawk Performance products, these hitches are proudly made in the USA.

This receiver hitch accepts standard 2" automotive receiver hitch components. 2" receiver hitches are commonly used on most pick-up trucks. Many people already own these hitch bars and components, but these parts are also readily available at any large discount store or auto parts chain.

If installing on a RZR with a front bumper installed, be sure to verify that the bumper tubes are at least 13" apart where the receiver tube will be positioned in order to allow for installation of a common hitch pin (this can be reduced to approx 10" between tubes if using a 3.5" long bolt).

Manufacturer Warranty Statement:
The manufacturer of this product has made your complete satisfaction is our primary goal. All products and services offered by this manufacturer have undergone extensive testing and evaluation to insure the highest level of quality, performance, fit and finish and are guaranteed to be free from material or manufacturing defects when you receive them. However, the industry standard for competition and off-road parts is no warranty, and these products are sold "as is" without any warranty for wear or breakage whatsoever. Implied warranties, including warranties of merchantability or fitness for a particular purpose, are excluded.

Neither the manufacturers nor TrailKings, LLC are liable for damages caused by defective materials or workmanship. Should such parts prove defective following their installation, the buyer and not the manufacturer, distributor or retailer, assumes the entire cost of all associated servicing or repair. Any attempted modification, repair or alteration of any product will immediately void any warranty. The manufacturer shall be the sole judge of the existence of any defect and shall, in no event, be liable for consequential damage or contingent liability.

For Installation tips and tricks click here!