-
Dual Entry
Convenient access from the side and front, with flexible pitching options. -
Refined Geometry
Optimized floor plan and canopy shape balance usable space with a compact footprint. -
Adjustable Pitch
Fine-tune height for greater coverage or increased airflow. -
Wind Stability
Tapered profile and aggressive curvatures create a taut, wind-shedding pitch. -
Modular System
Works seamlessly with either the Y-Zip Bug Bivy or 1P Bug Shelter. -
Double-Wall Efficiency
Mitigates condensation while maintaining excellent ventilation.
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
1P Cirriform DWThe Cirriform, available with your choice of inner This double wall (DW) system pairs the 1P Cirriform with your choice of the 1P Bug Shelter or Y zip Bug Bivy. Buying the system saves you money compared to buying the components separately. You'll also get an extra stuff sack big enough to fit both items, and we'll pre install all the rigging for you. NOTE: Closeout Cirriforms are available here. They had too much coating applied and are heavier than
The Cirriform, available with your choice of inner
This double-wall (DW) system pairs the 1P Cirriform with your choice of the 1P Bug Shelter or Y-zip Bug Bivy.
Buying the system saves you money compared to buying the components separately. You'll also get an extra stuff sack big enough to fit both items, and we'll pre-install all the rigging for you.
NOTE: Closeout Cirriforms are available here. They had too much coating applied and are heavier than stock.
Description
Learn about the 1P Cirriform DW
At the end of a long day, setting up your shelter should feel straightforward and sure - fast to pitch, solid in wind and rain, and dependable as the light fades. Designed around real trail experience, the Cirriform DW pairs the Cirriform tarp with your choice of inner - the Y-Zip Bug Bivy or 1P Bug Shelter - for a modular, double-wall (DW) setup that's balanced, capable, and trustworthy.
Refined by Experience
Every curve, angle, and stitch of the Cirriform DW has been shaped by years of real trail use - by YAMA and by thru-hikers who've relied on it through wind, rain, and long miles. It's not about chasing the lowest weight; it's about making thoughtful choices that enhance performance, stability, and ease of use.
Dual entry
The dual-entry design offers side access for fair-weather convenience and front access for protection during poor weather or high condensation.
Adaptable and Modular
The Cirriform DW system lets you choose the setup that fits your needs:
- Y-Zip Bug Bivy: Minimalist protection with the smallest footprint and lowest weight
- 1P Bug Shelter: Added room and flexibility for extended trips or variable conditions
Made in Vietnam and field-tested in Montana
Specifications
Weight
With Bivy
- Tarp: 332g | 11.7 oz
- Bivy: 210g | 7.4 oz
- Rigging: 67g | 2.3 oz
- 3 Stuff Sacks: 28g | 1.0 oz
- Total Packaged Weight: 637g | 22.4 oz
With Bug Shelter
- Tarp: 332g | 11.7 oz
- Bug Shelter: 278g | 9.8 oz
- Rigging: 70g | 2.5 oz
- 3 Stuff Sacks: 30g | 1.0 oz
- Total Packaged Weight: 710g | 25.0 oz
Total Packed Size
- With the Bivy: ~10.5" x 7" x 4" | ~27cm x 18cm x 10cm
- With the Bug Shelter: ~10.5" x 7" x 5" | ~27cm x 18cm x 13cm
Cirriform Tarp Dimensions
- Packed size: ~10" x 7.5" x 2" | ~25.5cm x 19cm x 5cm
- For overall dimensions of this tarp, please see the diagram which depict common dimensions for various pitches.
Click to enlarge
Bivy Dimensions
- Length: 86" | 218.5 cm
- Height at head: 23" | 58.4 cm
- Height at foot: 16" | 40.6 cm
- Width at head: 34" | 86.4 cm
- Width at foot: 26" | 66.0 cm
- Tub height: 5" | 12.7 cm
- Packed size: ~9" x 5.5" x 2" | ~23cm x 14cm x 5cm
Click to enlarge
Bug Shelter Dimensions
- Length: 88" | 223.5cm
- Height at head apex: 42" | 107.0cm
- Height at foot apex: 22" | 56.0cm
- Front width: 36" | 91.5cm
- Rear width: 28" | 71.1cm
- Tub depth: 8" | 20cm
- Floor area: 19.6ft2 | 1.8m2
- Zipper length: Full width @ front, ~2/3 length along side, full height to apex
- Packed size: ~11" x 7" x 2" | ~28cm x 18cm x 5cm
Click to enlarge
Durable, Lightweight Materials
The Cirriform DW is made from durable, recycled 20D Silpoly - a lightweight fabric chosen for its reliable performance in outdoor environments.
Tarp: Recycled, 20D Silpoly
Silpoly absorbs less water than silnylon, reducing added weight, and lower sag ensures the tarp stays taut through the night.
-
- Weight: 40-41 gsm | ~1.2 - oz/yd2
- Hydrostatic Head: ~1800mm
- Outer face coating: Silicone-based
- Inner face coating: Silicone-based
- PFAS Free: Yes
- Taped Seams: Not taped - Seam sealing is required
- Color: Shark gray
Floor: Recycled, 20D Silpoly
PeU-coated on the interior for improved puncture resistance and reduced slipperiness.
-
- Weight:~45 gsm | ~1.23 oz/yd2
- Hydrostatic Head: ~2500mm
- Outer face coating: Silicone
- Inner face coating: PeU
- PFAS Free: Yes
- Taped Seams: Yes
- Color: Shark gray
Canopy: Ultralight, no-see-um mesh
-
- Weight:~17 gsm | ~0.5 oz/yd2
- Material: Nylon
- PFAS Free: Yes
- Color: Black
Components:
-
- Zipper: YKK, Size #3
- Webbing: Recycled Nylon
- Reflective webbing: Polyester
Required items (not included):
The items needed to pitch your shelter will vary depending on your approach.
- Front Pole: About 44" - 45" (~111 - 114 cm) when pairing with the Bug Shelter or 39" - 42" (~99 - 107cm) when pairing with the Bivy
- Rear Pole: At least 31" (~79cm) when pairing with the Bug Shelter or at least 26" (~66cm) when pairing with the Bivy
- Stakes: 6 (8 for better wind stability)
- Rigging: If you plan to pitch the inner on its own (not under the Cirriform), you will need additional guyline or our Stand-alone rigging kit. If using tent poles or trekking poles without baskets, you may also need two of our guyline grommets (not needed with stand-alone kit).
Notes/FAQ:
- Do I need a groundsheet? A groundsheet is not required, but using one will help extend the life of any floor.
- Do I need to seal the seams? Tarp seams should be sealed using a sealer for silicone coated fabrics (we recommend Seam Grip +SIL by Gear Aid). Optional seam sealing service available. Floor seams are factory-taped and don't require sealing.
Pitching
How to pitch
Start by staking out the corners of the tarp to establish your base. Raise the poles at the peaks and stake them to form the shelter's shape. Adjust and tension the lines evenly for a tight, balanced pitch. Once the outer is secure, attach the inner by clipping the corners and apexes to the tarp. When breaking camp, leave the inner and outer connected so your shelter is ready for a quick, seamless setup next time.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 598 reviews
Sort
Product Reviews
★★★★★ 5
High-quality, high-value
Color: Black, Size: Fits Desk Leg: 80mm(D) x 50mm(W)
I was looking for something similar for my Uplift Desk for a long time, and gave up until I built a new computer and had a reason to resume the search. Seriously, this desk mount is top-tier; I'm coming out of a long drought to review this product.
The build quality, strength and stability is impressive, and assembly is easy. I'm confident that the stand could hold my body weight, let alone a computer. The appearance of the finish is high-quality, and color matches the coated steel frame of the Uplift desk flawlessly.
In terms of possible areas of improvement, I'd love to see a tighter vertical fitment of the top bracket's sliding arm, and I'd love if there were more rubber anti-slip pads and spacers of different shapes and sizes included. I ended up double-stacking the anti-slip pads, using superglue to adhere them to each other, to give my PC more breathing room on its underside.
I'd also love to have the option to select different sizes of base plates.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2026
★★★★★ 5
Great Quality Product
Color: Black, Size: Fits Desk Leg: 80mm(D) x 50mm(W)
Great quality and product was easy to assemble. Works perfectly for my sit/stand desk and precisely what I needed to get my desktop off the ground and to have it feel out of the way.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026
★★★★★ 5
Sturdy mount
Color: Black, Size: Fits Desk Leg: 80mm(D) x 50mm(W)
Great product, very sturdy. no doubt I trust this mount/adapter to hold my 50lb PC.
Installation instructions were a little lacking in explaining what to do with the small black rubber pieces. Also, I feel it is very important to ensure the bracket is level before mounting the product - especially if you have a HDD inside your computer.
Nothing to knock a star off for.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 5
Fantastic when paired with FLEXISPOT desk!
Color: White, Size: Fits Desk Leg: 80mm(D) x 50mm(W), Color: White, Size: Fits Desk Leg: 80mm(D) x 50mm(W)
I've got this to get my gaming PC off the floor, but keep it off the desk. It delivers. It fit my FLEXISPOT EC1 Electric White Standing Desk perfectly. This PC is 39lbs and there's no sign of it slipping or sagging under the weight as the base is sturdy. The top bracket isn't perfect for this uniquely size case. It installed in <5 minutes start to finish. I used an electric hammer-drill and it cinched up the proviced T-25 screws with ease. For me there's very little that I would change except for the top support bracket arm being slightly different sized.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 21, 2025
★★★★★ 5
It's good
Color: White, Size: Fits Desk Leg: 80mm(D) x 50mm(W)
Pretty good ngl, working well
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026