Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
PLA Plus 2.0 Filament – 3D Printer Filament – 3D Printdraad – 3D Print Filament – PLA+ Filament – 10 kg Bundel – Hoge Printsnelheid 50-600 mm/s – Nauwkeurige Diameter ±0,02 mmOntdek het 10 kg PLA Plus 2. 0 High Speed 3D printerfilament Ben je op zoek naar een betrouwbaar en krachtig filament waarmee je sneller en preciezer kunt printen? Deze set van 10 kilo hoogwaardige PLA Plus 2. 0 filament is speciaal ontwikkeld voor wie maximale printprestaties wil combineren met duurzaamheid en gebruiksgemak. Met een assortiment van 10 verschillende kleuren heb je altijd het perfecte filament bij de hand voor elke creatieve uitdaging.
Ontdek het 10 kg PLA Plus 2.0 High Speed 3D-printerfilament
Ben je op zoek naar een betrouwbaar en krachtig filament waarmee je sneller en preciezer kunt printen? Deze set van 10 kilo hoogwaardige PLA Plus 2.0 filament is speciaal ontwikkeld voor wie maximale printprestaties wil combineren met duurzaamheid en gebruiksgemak. Met een assortiment van 10 verschillende kleuren heb je altijd het perfecte filament bij de hand voor elke creatieve uitdaging.
Waarom kiezen voor dit PLA Plus 2.0 filament?
PLA Plus 2.0 is een verbeterde versie van standaard PLA-filament en biedt jou veel voordelen die je 3D-printproces efficiënter en aangenamer maken. Of je nu een hobbyist, professional of maker bent, dit filament maakt het mogelijk om sneller te printen zonder in te leveren op kwaliteit of details.
Belangrijkste voordelen
- Hoge taaiheid en duurzaamheid: Met 12 keer meer taaiheid dan gewoon PLA is dit filament ideaal voor functionele onderdelen, prototypes en objecten die sterker en langer mee moeten gaan.
- Snel printen zonder kwaliteitsverlies: Geoptimaliseerd voor snelheden tussen 50 en 600 mm/s, hierdoor kun je je printtijd aanzienlijk verkorten terwijl je toch strakke, klontvrije en gedetailleerde resultaten behaalt.
- Precieze diameter van ±0,02 mm: De strikte toleranties zorgen voor consistente doorvoer en minimale kans op verstoppingen, wat resulteert in een gladde afwerking en minder kromtrekken, ook bij grote prints.
- Praktische spoelen met verwijderbare kern: De spoel is ontworpen voor eenvoudige bediening, geschikt voor navulsystemen die het wisselen van filament makkelijk maken zonder extra spoelen te kopen.
- Vacuümverpakt en beschermd tegen vocht: Elke spoel wordt geleverd in een vacuümverpakking met droogmiddel, zodat het filament lang vers blijft en je probleemloos kunt printen.
Specificaties en gebruikstips
- Filamentdiameter: 1,75 mm met strikte precisie
- Gewicht per spoel: 1 kg, totaal 10 kg in diverse kleuren
- Geschikt voor printsnelheden: 50-600 mm/s
- Printtemperatuur mondstuk: tussen 200°C en 260°C (afhankelijk van gewenste printsnelheid)
- Printbedtemperatuur: 50-60°C voor optimale hechting
Met deze filamentbundle heb je een uitgebreide keuze aan kleuren én de kwaliteit om je projecten sneller en beter te realiseren. Of je nu een gedetailleerd prototype maakt, een creatief model of een stevig functioneel object, dit filament voldoet aan hoge eisen.
Voor wie is dit filament geschikt?
Perfect voor 3D-printliefhebbers, ontwerpers en professionals die value hechten aan scherp detail, betrouwbaarheid en snelheid. Ideaal voor grotere printopdrachten waar consistentie en kracht essentieel zijn, maar ook voor snelle, kleurrijke prototypes.
Zorg dat je altijd het juiste filament bij de hand hebt en ervaar zelf het gemak van snellere, sterkere en precisie 3D-prints. Voeg deze veelzijdige 10 kg PLA Plus 2.0 filamentset vandaag nog toe aan je winkelwagen en til je printprojecten naar een hoger niveau!
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 900 reviews
Sort
Product Reviews
★★★★★ 5
Another excellent Anker product!
Size: 1pack, Color: Black, Size: 1pack, Color: Black
Light weight, compact enough to pack away for travel, and doesnt make my phone hot. I've never been much for wireless charging given its slow speed. However my phone likes to glitch when it fully dies, saying there's water in the charge port when there's no water or debris. Meaning it wont take a charge thru the type C port, thus a wireless charger became nessicary. I have 2 Anker battery packs and love them both, they're high quality, affordable, and versatile. This Anker 313 wireless charging stand is no exception to Anker's reputation for quality and durability. I've found myself using it far more than I thought I would! If you're looking for a solid stand with wireless charging this is a great choice!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 11, 2026
★★★★★ 4
These are very nice but limited life
Size: 1pack, Color: Black, Size: 1pack, Color: Black
I got a couple of these for my wife's iphone 8+.
They really are great in all charging respects when fed with a high power supply.
But be aware they probably will not have long life. It depends on how often you plug/unplug the charger cord, and how you manhandle the charger itself.
What I hate about these is the use of the USB micro charging port.
If Anker were to use a USB type C charging port -maybe the lifespan would be greater.
But I doubt it. This is why a 5 star item becomes a 3 star.
The problem with USB ports as a power connector is that most people are rather klutzy with this connector while plugged into the charger's port. The USB micro connector socket is a very flimsy structure and not suited to heavy use (many plug/unplug or move cycles).
If you are clumsy with plugging in the cable, you bend the outer metal housing that both guides the connector in while plugging, and also holds fast the connector so the contacts mate and remain in contact. Same is true if you move the charger body...it flexes the power cord which in turn wobbles the connector.
Another great way to mangle the connector is moving or dropping the charger's body while the cord is connected. Anything that wobbles the cord while connected tends to waller out the USB port and after enough slop, the charger can become inoperative.
Once the geometry of the housing is compromised, the electrical power connection becomes flaky (intermittent) and then you have a charger that may or may not work. So then you have a phone without the expected recharge. For most people this forces them to discard and re-purchase the charger.
Call it designed-in obsolescence (shortened lifespan).
I have seen this across a wide range of electrical items. Anything that uses the USB mini or micro port as an electrical path for the sole purpose of energy transference will eventually fail. USB type A (large rectangular) is less affected by this due to the heavier, robust structure.
For me, I repair these by simply installing a permanently connected power cord. Soldered directly to the charger's circuit board. This is not something most people can do, and it requires intrusive access to the charger. On this model there are no screws to gain access to the connector and PCB...the case is permanently glued together.
If Anker wanted to provide a better solution, they would deploy these with a barrel connector/power pack, but they play this game with the consumer forcing them to buy a separate, high-power pack that must be USB.
bleah!
Update 10 July 2023
Anker was graceful in contacting me the day after submitting this review and offering a full refund.
Admittedly, I wrote this, feeling a bit frustrated that the product failed, but surprised with Anker's response with a request they be given another chance. Very commendable in today's world.
+1 star for their diligence.
Re:
Duly noted.
I'm sorry to have reported my experience with this product but it is the truth.
Thanks but no thanks for the refund offer. I hardwired a power cord to the charger and now it works without intermittent behavior thus sustaining its use.
Another chance? Of course. I like the product (and Anker) but do not like the micro USB connector it uses.
I may follow up with a secondary comment on the rapidity of your response.
This was a generalized comment for the industry to consider.
I only apologize that it was targeted solely at Anker.
You are not alone. Many of your competitor's products use the same connector so the consumer has little choice but to accept the limitations -or choose a product that does NOT use the mini or micro USB connector. Good luck with that.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 8, 2023
★★★★★ 5
Anker is the only option for your charging needs
Size: 1pack, Color: Black
The Anker 313 charging stand is a simple, reliable wireless charger that works great for my everyday use with my iPhone 16 Pro, especially for overnight charging. It’s a straightforward iPhone-compatible stand that may not be the best for speed, but this actually makes it ideal for bedside use.
One of the best features is that it charges through thicker cases. My phone has a fairly bulky case and it still charges without any issues. Its magnet isn't strong, but it will do the job. As I noted, charging speed is moderate rather than fast. So it won’t top up your battery quickly during the day, but that’s actually perfect for overnight use since it charges steadily without generating excessive heat concerns. The stand design is also convenient because you can keep the phone upright for notifications or Face ID, and it can even charge in landscape orientation if you want to watch videos while it’s docked.
Overall, the Anker 313 is a great budget-friendly wireless charger that does exactly what it needs to do. It is dependable charging, good case compatibility, and a stable stand design. It’s not meant to be the fastest charger, but for a nightstand setup with an iPhone 16 Pro, it’s a practical and reliable option. You can't go wrong with this one.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 6, 2026
★★★★★ 5
it works and it hasn’t failed me!
Size: 1pack, Color: Black
i’ve had this phone charger for a year and it works well! it charges decently and even flashes a little blue blinking light when it’s not placed on properly so you know if it’s charging or not. i will say the speed at which is charges is average, so it’s not a super fast charger.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
★★★★★ 5
Awesome product will not disappoint
Size: 1pack, Color: Black
This is something like the 5th+ one of these Anker 313 Wireless Charger Stands that I’ve purchased. Why 5+? Because these are really great wireless charging devices. I have bought myself a few, bought them for my sons and even, bought my ex-husband one. I’ve yet to have one not work, they just keep on providing a great charging system and having the cell phone sitting up like it does in the charger is a bonus. While cell is charging, if a call or text comes in, you can see that without picking up your cell. Also, you can be charging your device while you’re using it since this charging device props up your cell. On a side note, I did have a problem just recently with my cell not charging while on the stand, *BUT I found out it was the *charging cable that I had purchased separately that was defective. I replaced the cable with a new one and the Anker 313 Wireless Charger (Stand) was immediately charging again. If you are thinking about buying this charger, I recommend that you do. You will not be disappointed in this charger…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2026