
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
For Your Every Summer RSVP, with Code: SUMMER15
Description
Carli Suspension XDK277 2.5" Backcountry Leveling SystemUpgrade your Dodge Ram 2500 4WD with the Carli Suspension 2. 5" Backcountry Leveling System CS DLVL BC CS 1419 D. The Backcountry System is designed for people seeking the best ride. With on and off road quality, on a budget; basically, the Leveling Kit for those that want to have a little dirt road fun in their 8,500lb truck without losing the on road ride quality or usability for which the truck was designed. You're no longer limited to the highway
Upgrade your Dodge Ram 2500 4WD with the Carli Suspension 2.5" Backcountry Leveling System CS-DLVL-BC-CS-1419-D. The Backcountry System is designed for people seeking the best ride. With on and off-road quality, on a budget; basically, the Leveling Kit for those that want to have a little dirt-road fun in their 8,500lb truck without losing the on-road ride quality or usability for which the truck was designed. You're no longer limited to the highway while gravel roads become uninteresting as you can drive them at speed with one hand on the wheel. The 2.5" lift height doesn't require the front or rear geometry correction of Carli 3" Systems.
Utilizing SPEC 2.0" Diameter, Remote Reservoir shocks, Carli developed a tune that delivers all around comfort and ride quality designed for on-road, in town, highway, towing/hauling as well as slow to mid speed off road use. The remote reservoir Carli SPEC 2.0 boasts 6063 Aluminum construction, anodized body for corrosion resistance, 5/8" hardened steel chrome plated shaft, full serviceability & rebuilding ability and are built with 1-peice bushings in the 6061 Billet rod-ends. These shocks are spec'd with a premium 5WT oil to balance lubricity, consistent damping and the widest available range in temperature variation.
The rear shocks are also included with this system and have been custom tuned to maximize the ride quality for the factory rear coil springs. As the rear springs remain unmodified, load capacity is maintained while predictability is improved. For those that aren't looking for massive increase in travel or big shocks but still desire a level stance and improved ride quality and handling characteristics, on and off-road, this is the perfect kit.
The front axle will be slightly pulled to the Driver's side following installation of the lift; this can be corrected with the addition of the Carli Adjustable Track Bar. Further, ride quality can be substantially increased with the addition of the Torsion Sway Bar. Carli recommends a 35" tire on a wheel that's no more than 9" wide with 5.5"-6" Backspace. An 18" diameter wheel will be best to ensure optimal ride quality (more rubber = better small bump compliance) and an unloaded tire pressure of 45F/40R is recommended.
This system will NOT be upgradable to any of the 3" Carli Suspension Systems. It's designed to be a solution for customers wanting a quality system with minimal lift and part inclusion. Customers can purchase the Pintop leveling shock package for a huge boost in on-road control and off-road performance as well as ancillary components compatible with this lift height but there isn't compatibility between the 2.5" leveling and 3" lift systems.
Carli recommends slight eccentric bolt compensation to correct caster after the lift as there are no Radius Arm Drops. For this reason, customers may experience a slight bow in the coil spring. Carli did not experience a coil bow in any of their test trucks but it's possible at the 2.5" lift height without a Radius Arm Drop Bracket.
Parts Included: AS-DLVLSPKG-CS20RR-A; CS-DATB-1419; CS-DBLT-1419-R; CS-DLRC-14-LVL-D; CS-DRM-14-20
Required & Optional Parts To Support This System:
Sway Bar Options (REQUIRED): CS-DSBD-14 or CS-DTSB3-1419
Radius Arms: CS-DFRA-14
Steering Stabilizer - High mount: CS-DHMSS-14
Steering Stabilizer - Low mount: CS-DLMSS-14
Ball Joints: CS-DBJP-14
Front Diff Guard: CS-DFDG-14
Utilizing SPEC 2.0" Diameter, Remote Reservoir shocks, Carli developed a tune that delivers all around comfort and ride quality designed for on-road, in town, highway, towing/hauling as well as slow to mid speed off road use. The remote reservoir Carli SPEC 2.0 boasts 6063 Aluminum construction, anodized body for corrosion resistance, 5/8" hardened steel chrome plated shaft, full serviceability & rebuilding ability and are built with 1-peice bushings in the 6061 Billet rod-ends. These shocks are spec'd with a premium 5WT oil to balance lubricity, consistent damping and the widest available range in temperature variation.
The rear shocks are also included with this system and have been custom tuned to maximize the ride quality for the factory rear coil springs. As the rear springs remain unmodified, load capacity is maintained while predictability is improved. For those that aren't looking for massive increase in travel or big shocks but still desire a level stance and improved ride quality and handling characteristics, on and off-road, this is the perfect kit.
The front axle will be slightly pulled to the Driver's side following installation of the lift; this can be corrected with the addition of the Carli Adjustable Track Bar. Further, ride quality can be substantially increased with the addition of the Torsion Sway Bar. Carli recommends a 35" tire on a wheel that's no more than 9" wide with 5.5"-6" Backspace. An 18" diameter wheel will be best to ensure optimal ride quality (more rubber = better small bump compliance) and an unloaded tire pressure of 45F/40R is recommended.
This system will NOT be upgradable to any of the 3" Carli Suspension Systems. It's designed to be a solution for customers wanting a quality system with minimal lift and part inclusion. Customers can purchase the Pintop leveling shock package for a huge boost in on-road control and off-road performance as well as ancillary components compatible with this lift height but there isn't compatibility between the 2.5" leveling and 3" lift systems.
Carli recommends slight eccentric bolt compensation to correct caster after the lift as there are no Radius Arm Drops. For this reason, customers may experience a slight bow in the coil spring. Carli did not experience a coil bow in any of their test trucks but it's possible at the 2.5" lift height without a Radius Arm Drop Bracket.
Parts Included: AS-DLVLSPKG-CS20RR-A; CS-DATB-1419; CS-DBLT-1419-R; CS-DLRC-14-LVL-D; CS-DRM-14-20
Features:
- Fits Up To 35" Tires
- Increases Wheel Travel To 9.5" Front & 9.5" Rear
- Does Not Include Leaf Spring Option And Sway Bar
- Corrosion Resistant Aluminum Bodies Provide Long-Lasting Finish
- System Includes Multi-Rate Front Coil Springs, Front And Rear Shock Package, And Adjustable Track Bar
- Carli-Tuned Remote Reservoir 2.0 Shocks Provide Comfortable On-Road Feel & Better Off-Road Performance
Required & Optional Parts To Support This System:
Sway Bar Options (REQUIRED): CS-DSBD-14 or CS-DTSB3-1419
Radius Arms: CS-DFRA-14
Steering Stabilizer - High mount: CS-DHMSS-14
Steering Stabilizer - Low mount: CS-DLMSS-14
Ball Joints: CS-DBJP-14
Front Diff Guard: CS-DFDG-14
Note:
This system is NOT compatible with trucks equipped with the factory auto-leveling air assist.
This system will NOT be upgradeable to any other Carli Suspension Systems.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 63 reviews
Sort
Product Reviews
★★★★★ 5
Great shirt for the price.
Material Type: Recycled Polyester, Color: Electric Blue, Size: Large
Bought this for my son. Very nice shirt for the price, it is true to size and the color is the same as the picture. Would definitely buy it again. The material is good quality. No issues whatsoever
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 19, 2026
★★★★★ 5
Great purchase
Material Type: Recycled Polyester, Color: Dark Navy, Size: X-Large
Purchased several shirts, all were great quality. You never know what you’ll get when you purchase sight unseen, these are worth it. Great value, style, and comfort. Color is exactly what you see online. True to size.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 25, 2025
★★★★★ 4
Great quality for price
Material Type: Recycled Polyester, Color: Red Stripe, Size: XX-Large
Very impressed with the shirt quality, especially for such a low price. Sizing is accurate.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
★★★★★ 5
For work or casual wear, this polo is a great choice.
Material Type: Recycled Polyester, Color: Port Stripe, Size: X-Large
I really like this polo. I've been wearing it once a week or every other week since November. Its very comfortable and breathable. This polo feels like it should last a while. The fit is good. I typcally wear XL and this XL fits great. I've pruchased it in both burgundy and black so far. I definitely recommend this shirt. For work or casual wear, this will look good.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 11, 2026
★★★★★ 5
Great value: These are my go-to work from home shirt
Material Type: Recycled Polyester, Color: Blue, Size: X-Large
I’ve been pleasantly surprised by these shirts and wear them weekly for Zoom calls, since I’m still working from home these days. I figured at the price point it was worth trying them out, and now I’ve bought several in different colors. They aren’t super soft, but they are comfy and look nice. I’m 6’1” ~220 pounds, and the XL slim fit still has plenty of room. I imagine the regular cut is incredibly boxy and oversized. The difference between polyester vs recycled polyester is inconsequential.
I typically buy expensive golf shirts, and these definitely aren’t as nice. They are a fraction of the cost though and a great “beater” work shirt / hang out shirt. It’s nice wearing something that looks and feels decent, but if something happens to it, you can toss and it and pick up another for the cost of a chipotle burrito.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2022