
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
For Your Every Summer RSVP, with Code: SUMMER15
Description
Carli Suspension XDK358 2.5" Signature Series Leveling Starter SystemUpgrade the ride in your Ford F250 F350 Super Duty 4WD with the Carli Suspension 2. 5" Signature Series Leveling Starter System CS FLVL STR SIG 05. The Super Duty Starter system is designed for people who want a small suspension lift without the stereotypical ride quality degradation associated with mass produced "lift and leveling kits". The included, custom tuned, Carli Signature Series Shocks are longer to accommodate the extended travel. When
Upgrade the ride in your Ford F250/F350 Super Duty 4WD with the Carli Suspension 2.5" Signature Series Leveling Starter System CS-FLVL-STR-SIG-05. The Super Duty Starter system is designed for people who want a small suspension lift without the stereotypical ride-quality degradation associated with mass-produced "lift and leveling kits". The included, custom tuned, Carli Signature Series Shocks are longer to accommodate the extended travel. When designing the shocks, Zinc plating, Clear Coat for corrosion resistance and quality bushings were a must; finished off with boots to protect the shafts.
The truck will sit 2.5" higher in the front and have more wheel travel thanks to the taller, lighter rate coil springs. Stainless Brake Lines and an Adjustable Track Bar round off the front end geometry correction while Caster Shims improve on the stock handling. The rear is outfitted with matching custom-tuned Signature Series shocks and is recommended to be optioned with a Progressive Add-a-Pack (not included) lifting it 2" and help keep the truck planted over rough terrain while maintaining factory towing and payload capacity. The 2.5" systems are designed to work with trucks equipped with the 2" rear block. Super Duties equipped with a 3-5/8" tall block from the factory will require the factory 2" tall Block to achieve a leveled stance with the Add-a-Pack. Part Number: 7C3Z-5598-L and 7C3Z-5598-K.
This system was designed with the Progressive Add-a-Pack and should not be run with the Full Progressive Leaf Springs.
Wheels and Tires: Factory Wheels SHOULD NOT be run with oversized tires. They're known to rub the radius arm, sway bar and most concerning - Brake Lines. Factory tires and factory wheels will work without issue but Carli DOES NOT recommend running oversized tires on factory wheels. On their 2.5" Ford Systems, Carli recommends 17"-18" wheels, no more than 9" wide with 5.5" of backspacing with Carli Fabricated Radius Arms or 5" Backspace with factory arms; 5" will require a bit more trimming. Tires, 37"x12.5" will fit with some trimming; 35" will likely fit without trimming. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter.
Required and Optional Parts to support this system:
Radius Arms: CS-FARA-LVL-05
Leaf Spring Options (REQUIRED): CS-FPAP-05 or CS-FFSP-LVL-05 or CS-FFSP-LVL-05-HD
Steering Stabilizer - Low mount: CS-FLMSS-05
The truck will sit 2.5" higher in the front and have more wheel travel thanks to the taller, lighter rate coil springs. Stainless Brake Lines and an Adjustable Track Bar round off the front end geometry correction while Caster Shims improve on the stock handling. The rear is outfitted with matching custom-tuned Signature Series shocks and is recommended to be optioned with a Progressive Add-a-Pack (not included) lifting it 2" and help keep the truck planted over rough terrain while maintaining factory towing and payload capacity. The 2.5" systems are designed to work with trucks equipped with the 2" rear block. Super Duties equipped with a 3-5/8" tall block from the factory will require the factory 2" tall Block to achieve a leveled stance with the Add-a-Pack. Part Number: 7C3Z-5598-L and 7C3Z-5598-K.
This system was designed with the Progressive Add-a-Pack and should not be run with the Full Progressive Leaf Springs.
Wheels and Tires: Factory Wheels SHOULD NOT be run with oversized tires. They're known to rub the radius arm, sway bar and most concerning - Brake Lines. Factory tires and factory wheels will work without issue but Carli DOES NOT recommend running oversized tires on factory wheels. On their 2.5" Ford Systems, Carli recommends 17"-18" wheels, no more than 9" wide with 5.5" of backspacing with Carli Fabricated Radius Arms or 5" Backspace with factory arms; 5" will require a bit more trimming. Tires, 37"x12.5" will fit with some trimming; 35" will likely fit without trimming. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter.
Required and Optional Parts to support this system:
Radius Arms: CS-FARA-LVL-05
Leaf Spring Options (REQUIRED): CS-FPAP-05 or CS-FFSP-LVL-05 or CS-FFSP-LVL-05-HD
Steering Stabilizer - Low mount: CS-FLMSS-05
Features:
- Caster Shims
- Carli Coil Springs
- High-Quality Bushings
- 2.5" Front Lift Height
- Designed For A Leveled Stance
- Carli Signature Series Shocks
- Extended Stainless Steel Brake Lines
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 1917 reviews
Sort
Product Reviews
★★★★★ 3
Not impressed
Not impressed; doesn’t look as good as in the photos. Also, the one I received it not level? I don’t know if it was stored on a shelf incorrectly or it’s it’s a design flaw.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 26, 2025
★★★★★ 5
Compact Size
Does exactly what I purchased it for. Organized my items and in one spot.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2024
★★★★★ 5
Works, good holding power
Size: 4.5", Style: Open
Arrived as scheduled just as pictured. Purchased to hold my yard shovels & tools ( metal building) holds my square nose shovels, D handle Shovels w/o slipping. Impressed & happy with performance, enough to order again. Very happy with purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
★★★★★ 5
Perfect
Size: 4.5", Style: Open
These hooks are so functional and great for organization in the garage. Perfect for hanging extension cords and other misc items that you want to have easy access to. Super simple installation; lift the release and move then flip back down to lock again. Very sturdy and magnet is strong. Worth the buy!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 18, 2024
★★★★★ 5
Great for shed organizing
Size: 4.5", Style: Open, Size: 4.5", Style: Open
We recently upgraded to a conex/shipping container/metal shed and needed a way to organize all of our yard tools. These work great, the weight holds a lot of items, could be a little longer but we were impressed with them holding everything for over a month now and not moving.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 20, 2026
recommand products
Synchronizer Cone 1316 304 190 for ZF Gearbox Transmission 16S2220 16S2230 16S1820
152.28
Dipper Stick Arm Cylinder Seal Kit AT200548 for John Deere Excavator 80 190E
153.72
Oxygen Sensor 0258017080 0045424818 for Mercedes-Benz C350 CLS350 E350
192.00
Clutch Disc Kit 87705458 for New Holland B100BLR B100BTC B110B B110BTC B110C B115B B90B B95B B95BLR B95BTC B95C B95CLR B95CTC
114.00
Solenoid Valve 72062185 for Ingersoll Rand Air Compressor
99.42