Weisshorn Double Swag Camping Swags Canvas Free Standing Dome Tent Dark Blue
SKU: 63559963997

Weisshorn Double Swag Camping Swags Canvas Free Standing Dome Tent Dark Blue

$118.80 $132.00
Save 10%
No.2 Bestseller on ssadisability.org >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 9 - Jul 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Weisshorn Double Swag Camping Swags Canvas Free Standing Dome Tent Dark BlueCamping. And enjoying the great outdoors. But it wouldnt so great if your tent isn't holding up the way the way it should. Or that the creepy crawlies and flying insects are in visitation mode and your tents open season. Or its so hot in here is the whinge of the day and wet dreams are regular rainy night specials. Fortunately, there is salvation. In the form of our ever reliable free standing swags. Check these out. A 14oz 400gsm water repellent Rip

Camping. And enjoying the great outdoors. But it wouldn’t so great if your tent isn't holding up the way the way it should. Or that the creepy crawlies and flying insects are in visitation mode and your tent’s open season. Or ‘it’s so hot in here’ is the whinge of the day and wet dreams are regular rainy night specials. Fortunately, there is salvation. In the form of our ever-reliable free standing swags.

Check these out.

A 14oz 400gsm water-repellent Rip stop canvas cover, 500gsm PVC flooring and an extra 10cm high edge all round. Swagspeak for the ultimate tear-resistant waterproofing. Fully enclosed for privacy with zipped openings for fresh air anytime. Mesh panels to keep insects out.Thick aluminium support poles to hold up the entire set up.

And as a bonus, you get pegs and guide ropes, carry bag and all the extras that make your camping experience unforgettable. For all the right reasons of course.

NOTE: Mattress is not included with this product. Mattress can be purchased separately in-store.

Features
14oz 400GSM water repellent Ripstop canvas
500GSM PVC waterproof flooring
10cm extra high floor edge to prevent dew leak in
Durable aluminium poles
UV resistant - reduces heat accumulation
Heavy duty zippers
Breathable inner fabric
Outer canvas and mesh can be fully rolled up
Mesh panels to keep insects out
420D Oxford PVC coating carry bag
2 x adjustable awning poles
Comes with pegs and guide ropes
Easy to set up

Specifications:
Size: Double
Base Dimension: 215 x 150cm
Height: 95cm
Carry Bag Dimension: 85x60x60cm
Colour: Dark blue

Package Content
1 x Camping Swag
1 x Assembly Kit
1 x Carry Bag

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 63559963997

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 2209 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
P
Verified Purchase
Peter Schott
Massapequa, US
★★★★★ 5
Use the best oil to protect your investment
Configuration: 4-Stroke, Size: 1 GA
Great product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 30, 2025
S
Verified Purchase
Steve M.
Waukegan, US
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
N
Verified Purchase
Nancy filippi
Waukegan, US
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025
R
Verified Purchase
rich911s
Dallas, US
★★★★★ 5
Worked for Volvo Penta SX Gimbal Bearing
Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2023
G
Verified Purchase
Greg
Lowell, US
★★★★★ 5
Great value
This kit worked perfectly on my Alpha one mercury outdrive. I saw a lot of people mention that it was a hassle to drill the hole when you better have all this alignment stuff. I threw it in use my regular drill drill guide and then the second hole was lined up. Pulling Gimble be very easy. I did have to adjust it up at an angle because my bearing was sitting in their crooked and it came out the second time I made the adjustment to the angle. I would highly recommend this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2024

recommand products

HINOMI H1 Pro V2 Ergonomic Office Chair with Footrest - Home Office Desk Chair with Lumbar Support, Mesh Office Chair with Headrest, Comfy Computer Chair with Back Support (Red, Standard)
471.20
Danco Brushed Nickel 8.13-in Bathtub/Shower Deck Plate (5.13-in-ID)
24.98
DELUXE BLACK SERISE BILLET POWER WINDOW SWITCH-WHITE LED
119.00
Steelcase Series 1 Office Chair - Ergonomic Work Chair with Wheels for Carpet - Helps Support Productivity - Weight-Activated Controls, Back Supports & Arm Support - Easy Assembly - Blue Jay
355.48
BLACK SERIES BILLET POWER WINDOW SINGLE SWITCH-ORANGE LED
59.00