Sennheiser GA 6042-15 15-pin adapter for Sony cameras
SKU: 80371850662

Sennheiser GA 6042-15 15-pin adapter for Sony cameras

Sale price$1573.72 Regular price$1748.58
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 7 - Jul 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Sennheiser GA 6042-15 15-pin adapter for Sony camerasSennheiser GA 6042 15 15 Pin DB Sub Slot In Camera Adapter The Sennheiser GA 6042 15 (Article Number: 506213) is a factory original original equipment manufacturer (OEM) hardware interface adapter. It is engineered explicitly for the Sennheiser EK 6042 flagship two channel digital wireless camera receiver, enabling it to mount and slide directly into the integrated wireless receiver slots found on professional Sony ENG (Electronic News Gathering) and

Sennheiser GA 6042-15 15-Pin DB-Sub Slot-In Camera Adapter

The Sennheiser GA 6042-15 (Article Number: 506213) is a factory-original original equipment manufacturer (OEM) hardware interface adapter. It is engineered explicitly for the Sennheiser EK 6042 flagship two-channel digital wireless camera receiver, enabling it to mount and slide directly into the integrated wireless receiver slots found on professional Sony ENG (Electronic News Gathering) and broadcast camcorders.

By utilizing this adapter, the EK 6042 receiver bypasses the need for external hook-and-loop fasteners, mounting brackets, or dangling external umbilical cables. It transforms the receiver into a self-contained, drop-in module that taps directly into the camera's internal structural interconnects.

Key Structural and Integration Attributes

  • Seamless Direct Power Interfacing: Eliminates the requirement for local battery packs or external Hirose cables. Once docked inside the slot, the 15-pin Sub-D connector draws clean, regulated DC operational power directly from the master Sony camera chassis battery pool.

  • Dual-Channel Audio Routing Through the Bus: Bridges both discrete wireless audio channels (Channel 1 and Channel 2) directly from the EK 6042's internal digital processing core straight to the camera's motherboard via the internal DB-15 bus, maintaining short, low-noise signal tracking paths.

  • UniSlot/SuperSlot Equivalent Frame Safety: Formed with strict mechanical tolerances to match Sony's internal slot specifications, the adapter aligns perfectly into position, preventing rattle, contact pin grinding, or unwanted horizontal shifting when the camera operator is running in field environments.

  • Rugged Aluminum Alignment Frame: The package includes a matching mechanical bottom alignment shield plate and a hard-anodized connector base built to endure high mechanical stress and repeated hot-swap cycles on fast-paced news studio floors.

Technical Specifications Matrix

Feature Parameter Hardware Specification Profile
Model Reference Name GA 6042-15
Official Article Number 506213
Global Trade Product Code (UPC) 615104254718
Master Receiver Compatibility Sennheiser EK 6042 (Two-Channel True Diversity Slot Receiver)
Target Camera System Standard Sony Broadcast Camcorders with 15-Pin slot-in audio interface cavities
Hardware Connector Node 15-Pin DB-Sub Male Connection Block
Audio Channel Pinout Paths Dual-Channel Line or Digital Routing Profile
Physical Dimensions Array 150 mm (Length) x 108 mm (Width) x 33 mm (Height, packaged)
Net Structural Weight 110 grams (3.88 oz)
Primary Base Material Precision-machined aluminum and high-impact composite polymer

In the Box: Component Inventory

  • 1 x GA 6042-15 15-Pin Sub-D Camera Adapter Card

  • 1 x Structural Stabilizing Bottom Plate

  • 1 x Complete Precision Mounting Screw Set

Field Installation and Mechanical Advice

Executing a Safe Module Transformation: When configuring the EK 6042 for slot deployment, first power down the receiver and slide off any existing back-panel power adapters. Position the GA 6042-15 connector board carefully into the receiver’s tail alignment guide, ensuring the internal pins seat evenly without being forced. Fasten the included retaining screws firmly hand-tight in a crisscross pattern using the proper screwdriver. Over-tightening can strip the threaded casing mounts.

Docking Tips for ENG Camcorders: Before pushing the converted EK 6042 receiver into the camera’s body slot, verify that the camera itself is completely powered down. Peer inside the camera bay with a flashlight to ensure no dust or stray costuming threads block the internal 15-pin female connector socket. Push the receiver smoothly straight into the bay until you feel it seat fully into the camera's bus, then engage the camera’s physical locking screws or safety latches to secure the module against accidental release in the field.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 80371850662

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 373 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Amazon Customer
Pawtucket, US
★★★★★ 5
so I felt like it was time to invest in a wrist pad
Color: Black, Size: Full Size
Im an Editor and spend most of my days typing in front of a computer. I've never really used a wrist pad before, but my wrists were laying on the edge of my desk, which after a while, began to hurt my wrists, so I felt like it was time to invest in a wrist pad. I looked at plenty of them here on Amazon and this one from Glorious had some great reviews, so I thought I'd give it a try. Even though I'm not a "gammer," this rest is beyond awesome! It's perfect for typing all day, and even though some reviews noted that it was too "high" - it's really not and works great on a keyboard with a kickstand under it, or even when I'm not using my wireless keyboard, it still works great typing on my MacBook Air (2015 Edition). It has a sticky underside that keeps it in place, but it's also not too sticky, so you can move it around with ease. I will admit, it is a little firm, so if you're looking for a wrist pad that's "gel-like" for your wrists to sink into - this is not for you. It's firm and holds your wrists up above the keyboard so that you're typing downward, rather than having your wrist slanted up at a 45 degree angle, which is terrible for you. I've only had the wrist pad for 2 days, but I can't tell you how much pain it's relieved from my wrists sitting on the edge of my desk. The full length one fits perfectly with my keyboard with the numbers extended on the right side, and should I decide to only use my laptop's keyboard, the pad works great for that as well. Would highly recommend to anyone who is looking for a solid, firm pad to rest your wrists on while typing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 15, 2016
A
Verified Purchase
Arthur H.
Houston, US
★★★★★ 3
My wrists feel like they are way too high to type comfortably
For the Price and function of this product to me it gets 3 stars. To problem is however for me, the height of the pad is a bit ridiculous. My wrists feel like they are way too high to type comfortably. I am using an HHKB pro2 and using this wrist rest, my wrists are suspended extremely high up compared to my keyboard. It just does not feel right. But at the very least this wristrest prevents me from digging my wrist into the edge of my desk which is all I wanted it to do really in the first place. But with my wrists this high up, it just seems extremely awkward to type normally. Maybe hopefully the wristrest will flatten over time. It has to be mentioned as well that my unit is not perfectly flat. If I put pressure on either the right or left side of the wrist rest, the opposite side of which I pressed will result in being raised upwards. This is not a huge problem, I am just nitpicking here. Lastly, the gaudy branding is a turn off for me. This is extremely subjective but if it came just purely with no logo or a much smaller one I would have been happier. I dont really need everyone who walks by my computer setup to read "Glorious PC gaming race." I just do not fit that age demographic anymore. If this wrist rest was a few CM lower in height, and the branding was gone. I wouldve easily gave it 6/5 stars. The build quality seems very good and sturdy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 8, 2015
U
Verified Purchase
User44567
Belleville, US
★★★★★ 5
Beautiful and comfortable wrist rest
Color: Walnut Wood, Size: Large
This walnut wrist rest is fantastic. It’s a solid, well-crafted piece of wood with a great natural feel. The edges are nicely filed and smooth to the touch, and the wood grain looks beautiful in person. You can really feel the texture of the wood when typing, but it’s never rough or uncomfortable—just a nice tactile reminder of the quality material. The color and finish are great, not glossy or sticky, and it stays cool and comfortable even during long sessions. It fits perfectly with my full-size keyboard and adds both comfort and a great aesthetic to my desk setup. If you’re looking for a wrist rest that’s both functional and classy, this is absolutely worth the price. Highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2025
G
Verified Purchase
GritWork
Alexandria, US
★★★★★ 5
Real walnut wood. High quality.
Color: Walnut Wood, Size: Large, Color: Walnut Wood, Size: Large
This is authentic walnut wood. I was apprehensive at first. My fear was that it was pine stained to the color of walnut. I thought the wood stain would come off on my wrists and wear over time. Turns out this is a genuine chunk of walnut! Worth the $20. I laser engraved my logo onto it and it revealed that it’s 100% walnut to the core. Elegant solution. Perfectly comfortable. Way less corny than those squishy wrist rests from the 2000’s. Nice rubber gaskets on the bottom to keep it from slipping. Does not move while in typing. The exact right size for supporting your wrist on a full size Keychron keyboard. I’m using it with a P6 Ultra. But it would fit any full size Keychron keyboard.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 23, 2026
T
Verified Purchase
The Cannish
Massapequa, US
★★★★★ 5
Surprisingly comfortable and stylish wrist rest!
Color: Walnut Wood, Size: Large
This wrist rest is the perfect compliment to my desk set up. I was hesitant about buying a wood product like this, but I’ve been pleasantly surprised how comfortable and smooth it is during extended use. For the price, it feels like a premium product, and I love that it stays put with the rubber feet. The size is perfect for a full-size keyboard, with just the right thickness to keep your wrist and palms comfortable. If you’re looking for an elevated way to decorate your desk while protecting your wrist, this is a great choice.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2026

recommand products