M18 FUEL 18-Volt 4-1/2 in./5 in. Brushless Cordless Grinder w/ Paddle Switch & M18 FUEL Hackzall w/ Two 6.0Ah Batteries
SKU: 70292205107

M18 FUEL 18-Volt 4-1/2 in./5 in. Brushless Cordless Grinder w/ Paddle Switch & M18 FUEL Hackzall w/ Two 6.0Ah Batteries

Sale price$224.55 Regular price$249.50
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

M18 FUEL 18-Volt 4-1/2 in./5 in. Brushless Cordless Grinder w/ Paddle Switch & M18 FUEL Hackzall w/ Two 6.0Ah BatteriesThe M18 FUEL 4 1 2 in. 5 in. Grinder supplies maximum sustained power to complete the toughest grinding, surface preparation and cutting applications. The POWERSTATE Brushless Motor provides up to 10X longer motor life and lower cost of ownership. The grinder features REDLINK PLUS Intelligence, the most advanced system of cordless power tool electronics, for maximum performance. Tool free accessory changes and guard adjustments mean less downtime

The M18 FUEL 4-1/2 in./5 in. Grinder supplies maximum sustained power to complete the toughest grinding, surface preparation and cutting applications. The POWERSTATE Brushless Motor provides up to 10X longer motor life and lower cost of ownership. The grinder features REDLINK PLUS Intelligence, the most advanced system of cordless power tool electronics, for maximum performance. Tool-free accessory changes and guard adjustments mean less downtime during work. The grinder is built with the same tool body, gearing system and anti-vibration side handle as Milwaukee's legendary high-performance corded grinders for maximum durability on the job. Grinding wheel sold separately. The M18 FUEL HACKZALL is the fastest cutting and most powerful 1-handed design reciprocating saw. The tool has a best in class 7/8 in. stroke length and cuts up to 50% faster than competitors. The dual gear counter balance mechanism provides the ARB265Wt in-cut vibration of any reciprocating saw, resulting in faster cut-starts in metal and reduced user fatigue. A rubber seal and weep holes provide superior protection against water and debris. M18 REDLITHIUM HIGH OUTPUT XC6.0 Battery Pack provides 50% more power and runs 50% cooler versus M18 REDLITHIUM XC battery packs. It delivers fade free power and runs substantially cooler through heavy applications, allowing tradesmen to push their cordless tools harder and longer. The REDLITHIUM HIGH OUTPUT XC6.0 battery is fully compatible with 200 plus M18 solutions.
  • POWERSTATE brushless motor: delivers maximum power and up to 10X longer motor life
  • REDLINK PLUS Intelligence provides optimized performance, electronic clutch and overload protection using total system communication between tool, battery and charger
  • 100% tool free: make all accessory changes and guard adjustments without a wrench for increased productivity
  • Power to grind: world’s first cordless grinder with corded performance
  • Durability: same metal housing and gearing system as legendary high performance corded grinders
  • No trigger lock, paddle-switch design provides increased comfort and ease-of-use when operating in various positions
  • 2780-20: speed 8,500 RPM
  • 2719-20: 1-handed design provides superior control and versatility over standard reciprocating saws
  • 2719-20: compact and lightweight design allows for easier cutting in tight spaces or overhead applications
  • 2719-20: 7/8 in. stroke length removes more material with each stroke resulting in the faster cuts
  • 2719-20: pivoting shoe provides constant contact with the work-piece resulting in smoother cuts with less bucking and vibration
  • 48-11-1862: onboard fuel gauge displays remaining run-time
  • 48-11-1862: best-in-class construction offers long-lasting performance and the best protection against jobsite, weather and environmental conditions
  • 48-11-1862: powers all 200 plus M18 cordless solutions
  • Includes: (1) 2780-20 M18 FUEL brushless cordless 4-1/2 in./5 in. grinder with paddle switch, (1) 2719-20 M18 FUEL brushless cordless HACKZALL reciprocating saw, (2) M18 6.0 batteries
  • 5-year tool/3-year battery warranty





Features
Item Weight 6.36
Arbor Size 0.625
Battery Size 18-volt
Product Weight (lb.) 5.8
Number of Batteries Included 2
Battery Amp Hours 6.0
Color Family Red
Variable Speed Yes
Returnable 180-Day
Cordless/ Corded Cordless
Battery Power Type Lithium Ion
Grinder Switch Type Paddle
Number of Tools (Bonus Tool Not Included) 1
Electronic Speed Control Yes
Charger Included Charger Not Included
Tools Product Type Power Tool
Number of Batteries Included2 2
Cordless Tool Type Angle Grinder
Amperage (amps) 0
Condition New
Power Tool Features Adjustable Handle Position,Brushless,No Tool Wheel Change,Spindle Lock,Variable Speed
Batteries Included Yes
Motor Type Brushless
Maximum Speed (rpm) 8500
Voltage (volts) 18
Product Height (in.) 8.58
Wheel Diameter (in.) 5
Product Depth (in.) 3.27
Product Width (in.) 15
Certifications and Listings cUL Listed
Manufacturer Warranty 5 year on tool / 3 year on battery

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 70292205107

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 757 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
N
Verified Purchase
Nancy
Carnegie, US
★★★★★ 5
Real steel pipe
Size: O Desk Unfinished 3/4-in and 1/2-in
This pipe table leg set was great. It's real steel pipe like from the hardware store. It does have a layer of oil on it so that must be stripped using dawn or some other degreaser before handleing and painting. It is also offset in the middle bar so if you use it as a desk you get more leg clearance. I used it as a table base so I bought matching middle braces to set the middle support in the center of the table. Once together it looks great. I highly recommend getting this if you want a good quality pipe base.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2023
K
Verified Purchase
Kim R-A
Birmingham, US
★★★★★ 5
Price / Quality - Office Desk - Perfect
Size: H Desk Unfinished 3/4-in and 1/2-in
Purchased two sets to create a custom L shaped desk for the office. Placed a pine stained top. Perfect to handle a monitor, multiple laptops, normal office equipment. Extra benefit is the cross piece at the bottom as a foot rest. Very sturdy while sitting on carpet. Compared to normal pipe material purchased in large box store -- could not have asked for a better product for the price. Looking at other products for additional projects for around the house for the product and vendor. - Highly Recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2021
J
Verified Purchase
Joseph E. Brackman
West Palm Beach, US
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo. Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side). I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure. The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried. I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable. The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's. Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020
R
Verified Purchase
Russel
Houston, US
★★★★★ 5
So nice I bought twice!
Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019
C
Verified Purchase
Colauhu
Louisville, US
★★★★★ 5
Durable and sturdy. I bought two
Size: H Desk Unfinished 3/4-in and 1/2-in
Love the kit. I ordered two to make an L-shaped desk for my home office. Perfect height, looks cool, and sturdy. Slightly tricky to get two of them to the exact same height but you can adjust them buy loosing/tightning parts. Way cheaper than going to the hardware store and buying the same parts. I wiped each piece down as they are a bit dirty/greasy, but no big deal.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2021

recommand products