Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Ford Racing 21-25 Bronco (2Dr) HOSS 3.0 Wildtrak Suspension 2in Lift KitMeet the HOSS 3. 0 Bronco Package engineered around a Prerunner mindset, as seen in Wildtrak models. At its core are five zone, rate sensitive FOX 2. 5 internal bypass shocks with remote reservoirs, which produce progressive damping zones that can go from compliant support to delivering maximum damping to prevent bottom out on big drops and events. Delivering solid control and plush compliance over the roughest terrain that never needs manual fine
Meet the HOSS 3.0 Bronco Package engineered around a Prerunner mindset, as seen in Wildtrak models. At its core are five-zone, rate-sensitive FOX 2.5 internal-bypass shocks with remote reservoirs, which produce progressive damping zones that can go from compliant support to delivering maximum damping to prevent bottom-out on big drops and events. Delivering solid control and plush compliance over the roughest terrain that never needs manual fine tuning. A direct bolt-in replacement suspension package, improving both ride quality and stance of your Bronco that has been validated through Ford's rigorous vehicle durability testing, including running and podium at the NORRA 1000.Backed by the Ford Performance 3yr/36,000 mile warranty from new vehicle in-service date when installed by a Ford Dealer or ASE/Red Seal certified technician. Approximately 2 of lift (on Non-Sasquatch packages) results in optimal ground clearance and approach/departure angles. Improves front approach angle:44.3 deg.vs.35.5 deg. stock. Improves rear departure angle:37 deg.vs.29.7 deg.stock.Fits:2021-2025 Bronco 2-Door.For 4-Door specific kit, see M-18000-B2.Pre-MY22 to check for sway bar endlink attachment brackets located on rear frame rail, not included with all models. Kit Includes: HOSS 3.0 - 2.5 FOX shocks with 5-zone damping including internal bypass and remote reservoirs. HOSS 3.0 - Rear stabilizer bar. Sway bar hardware and fasteners For additional instructions, please see here.This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2024 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2021 | Ford | Bronco | First Edition |
| 2023-2024 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2024 | Ford | Bronco | Outer Banks |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 586 reviews
Sort
Product Reviews
★★★★★ 3
Not as good as I expected
When it first came, the box fell apart as I was taking it out, and a lot of some kind of dirt or sand kept falling out all over my table and floor. I had the take the entire thing apart and thoroughly wash it.
After drying age reassembling it, I tried it on my portafilter that came with my Breville Barista Express, but, somehow, it doesn't always make the tamping level. You would think with the ridge that rests on the side of the portafilter that it would force it to remain level, but, somehow, it doesn't, at least not consistently. It also has varying lengths (heights, or depths), and a single spring tension, so you may still over tamping or under-tamp. I was expecting it would have a censor that would just detect once it reached 30 lbs of force and cut off after that, similar to a torque screwdriver, but that's not what this is.
I'll still give it 3 stars because, despite the problems mentioned above, it at least produces some amount of consistency, even if that isn't measurable; but, I can't give it 5 stars because of those issues mentioned above.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 7, 2025
★★★★★ 5
This is the one.
Size: 58.3mm, Color: Black
As an el Supremo Coffee Geek, I've wasted money on lots of different tampers. Save your money and buy this one or it's equivalent. This thing is heavy duty, solid, well-made, self-leveling, tamps at 30 pounds and is fool-proof even for fools. Also, it's a palm tamper meaning more fun and more satisfying to use as you prep the puck for your morning buzz. Buy it. You will thank me.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2024
★★★★★ 5
Super easy to use and takes the guess-work out of getting even pressure on the grounds
Size: 58.3mm, Color: Black, Size: 58.3mm, Color: Black
I have been using a hand tamper for many years and have a good idea of the pressure I am applying to the grounds in the portafilter. I honestly considered spring tampers to be a bit silly. But this tamper really does take the guess-work out of pressing the coffee grounds. The shroud helps guide the press so that pressure is applied even and flat across the surface. With the manual tamper, there will be some play when pressing, or some unevenness in pressure. This is especially true when cranking out many espressos during a breakfast party with friends. Having the spring tamper makes quick work of turning out a lot of coffees with consistency.
There are no instructions for taking this tamper apart to clean inside, and you may not really need to do that very often. After each use, just pull back the shroud (the black piece that moves up and down) and wipe off the tamper (the shiny steel part). This will help prevent grounds from working their way inside. If you do want to take it apart, it’s easy. Pull back the shroud and unscrew the tamper. It will come apart into three pieces. Wipe the pieces off and reassemble. Super quick and easy.
This tamper is very heavy. My scale shows 656 g (about a pound and a half). It fits the portafilter exactly, with no slop. Just place on top of grounds and press!. Don’t even worry about pressure, just push down all the way. Overall I had fun using this tamper versus my manual one. And since I make myself a cappuccino very early in the morning, I don’t have to be very awake to get a good pack on the grounds and get my coffee fast!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 10, 2024
★★★★★ 5
It is heavy
Size: 58.3mm, Color: Black
Item was as described and shipped promptly. It is heavy and works well with my portafilter. I haven't had it long enough to really evaluate how helpful it is.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2025
★★★★★ 5
Muy bueno
Muy bueno
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 18, 2025