NUGEN Halo Downmix 코어 플러그인
SKU: 8122013567

NUGEN Halo Downmix 코어 플러그인

$152550.00 $169500.00
Save 10%
No.2 Bestseller on ssadisability.org >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 7 - Jul 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

NUGEN Halo Downmix 코어 플러그인NUGEN Halo Downmix Halo Downmix , , . . . Halo Downmix . Expert surround to stereo . Fine tune surround to surround . Halo Downmix . 5. 1 7. 1 . . 3D Immersive Extension Halo Downmix 3D Immersive Extension Dolby Atmos 7. 1. 2 . Parallel workflows Halo Downmix NUGEN Receive () . A B . Halo Downmix . , . Halo Downmix '' , , .

NUGEN Halo Downmix 코어 플러그인


워크플로우 보완

Halo Downmix는 정확한 다운믹싱, 서라운드 밸런싱, 믹스 모니터링 및 정교한 스테레오 폴드다운을 가능하게 합니다. 작업 흐름을 하나로 연결하여 서라운드 및 스테레오를 타협 없이 쉽게 제공할 수 있습니다.

 

당면한 작업을 위해 완벽하게 설계된 인터페이스를 통해 더 나은 다운믹스를 생성하고 서라운드 믹스의 다운믹스 호환성을 향상시킵니다. Halo Downmix는 모든 서라운드 작업 흐름을 이상적으로 보완합니다.

Expert surround-to-stereo

다목적 다운믹스 밸런싱 및 믹스 모니터링으로 작업 흐름을 간소화하십시오.

  • 다운믹스 서라운드-스테레오
  • 서라운드 대 서라운드 미세 조정
  • 저주파 콘텐츠 조절
  • 대화 명확성 유지
  • 과도한 주변 소리 제어
  • 지연 아티팩트 제거
  • 서라운드 및 스테레오 인플레이스 모니터링

Fine-tune surround-to-surround

표준 다운믹스 계수를 사용하면 특히 원본 서라운드 믹스에 레거시 업믹싱 사례가 사용된 경우 만족스럽지 못한 결과가 발생할 수 있습니다. Halo Downmix는 이러한 문제를 신속하게 완화하고 인공 리버브에서 과도한 확산 사운드를 제어하고 후면 채널에서 지연 아티팩트를 제거하여 보다 일관된 스테레오 믹스를 생성합니다.

서라운드 대 서라운드 미세 조정

서라운드 투 서라운드 모드에서 기존 5.1 또는 7.1 믹스를 조정합니다. 개별 채널과 직접/확산 사운드 간의 균형을 조정하여 원본 믹스에 액세스할 수 없는 경우 서라운드 오디오를 미세 조정하거나 재조정할 수 있습니다.

3D Immersive Extension

Halo Downmix용 3D Immersive Extension 옵션은 Dolby Atmos 베드 트랙에 사용되는 형식인 7.1.2에서 다운믹스하는 기능을 추가합니다.

Parallel workflows

Halo Downmix는 또한 NUGEN Receive 플러그인(포함)과 함께 사용하여 병렬 서라운드/스테레오 워크플로를 활성화할 수 있습니다. 이를 통해 전체 서라운드 믹스와 스테레오 다운믹스 간의 신속한 A/B 확인이 가능합니다.



유연하고 직관적인 인터페이스

Halo Downmix는 정확한 다운믹싱을 위한 매우 창의적인 솔루션을 제공합니다. 상대적인 레벨, 타이밍 및 다이렉트/앰비언트 사운드 밸런스에 대한 직관적이고 시각적인 컨트롤을 통해 전례 없는 미세 조정이 가능하여 더 이상 일반적인 기본 프로세스에 의해 제한되지 않는 정확한 다운믹스를 제공합니다.

 

Halo Downmix의 고도로 사용자 정의 가능한 인터페이스에는 스테레오 및 서라운드 신호의 빠른 선택 '인플레이스' 모니터링, 모든 단계에서 빠르게 연결된 솔로 및 음소거 기능, 서라운드 에너지 분포의 명확한 시각화와 함께 고급 및 소형 모드가 모두 포함됩니다.

일반적인 애플리케이션

  • 서라운드-스테레오 다운믹싱
  • 서라운드 재조정 및 미세 조정
  • 동시 서라운드/스테레오 워크플로
  • 서라운드 복원
  • 서라운드 워크플로 내의 스테레오 프로덕션
  • 서라운드에서 대화 선명도 유지
  • 레거시 업믹싱 관행에서 후방 지연 아티팩트 제거
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 8122013567

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 2299 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
M. M. Bowden
Waukegan, US
★★★★★ 5
GREAT 80v edger (but Kobalt users beware)
Size: 8" Edger Gen1, Size: 8" Edger Gen1
This Greenworks 80v edger is fantastic. I was surprised at how sturdy and rigid the shaft is - much more so than the very much more expensive Stihl Brushcutter I used for years. I like the adjustability of the blade depth and the power is impressive. You will get more run time with higher amp batteries - I have both 2.0 and 2.5 amp batteries, but if you have multiple batteries and chargers (from acquiring multiple tools) you will never be waiting for a battery to charge. If you have only purchased Greenworks tools, then you are golden. BUT HERE IS THE RUB IF YOU, LIKE ME, THOUGHT THEY WERE STRAIGHT-ACROSS COMPATIBLE WITH THE SAME LINE OF TOOLS THEY MANUFACTURED FOR LOWE'S UNDER THE KOBALT MONIKER AND BLUE COLOR, AS DIFFERENTIATED FROM THEIR STANDARD BRIGHT GREEN. One of the reasons I went ahead and committed to buying the Kobalt line of 80v yard tools was because Greenworks made them and I figured that it would be a long-lasting and stable design platform, being the same 80v system across two different brands. Then Lowe's dropped the 80v line. I was able to get a few more of their tools for great clearance prices and looked forward to switching over to the complete line of Greenworks 80v tools. was very happy to be able to order their edger because it's the exact same power system - just that all of my gear is Kobalt blue. AND HERE IS THE DEAL WITH THAT: They are different. The Kobalt 80v battery will not fit/slide into the Greenworks 80v battery compartment/housing (*as manufactured). - I guess I shouldn't have been surprised - and it could have been Lowe's that required that the stuff made for them specifically would be incompatible. But since it's the same power system, I wondered what the difference was and if I could work-around their obstructionist corporate bs. What I discovered was that the battery compartment on the tools have two long molded channel-guides (male) that match the two long molded (female) channels in the batteries. The vertical placement of the bottom 'rail' in the tool/compartment is positioned in a slightly different spot between the Kobalt and Greenworks 'brands'. But this actually works, because I just used a hand chisel and removed the 'bottom' rail from the Greenworks tool/edger. WA-LA - EUREKA!!! It worked great! It's a great fit, the top rail is more than enough to hold the battery stably in position and the 'lock' mechanism functions perfectly! I am looking forward to buying more tools in the Greenworks 80 volt line without having to replace all of the Kobalt tools I already paid for AND ESPECIALLY the rediculously expensive batteries...
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 29, 2021
R
Verified Purchase
Ryan
Los Angeles, US
★★★★★ 4
Great product that makes edging very fast
Size: 8" Edger New
Edging was quite a job because I had to do it with a hand tool. I have quite a few Greenwork tools, so I decided to purchase the edger. It works great and I am in general happy with it. The three downsides for me are that tool is quite heavy when it also has the battery in it, that the metal blade decreases in size rapidly because of the friction when edging near concrete, and that the wheel is in such a position that I have to bend substantially while the blade does not edge deep enough so that I have to lean the tool on the metal strip at the bottom of the tool.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 17, 2025
R
Verified Purchase
rebecca hansen
Draper, US
★★★★★ 5
Very pleased
Size: 8" Edger New
Works well and gives a nice clean line. I am able to take care of the overgrown edges very fast.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
C
Verified Purchase
Charles Sebastian
Dallas, US
★★★★★ 5
Plenty of power. Easy to use.
Size: 8" Edger New
I was amazed at the power of this edger. Due to health issues we couldn’t give our lawn adequate attention. It hadn’t been edged in over a year. This edger cut thru the heavy overgrown grass. Maintaining the edging now is a breeze. It uses the same 80 volt battery as my blower👍. The only negative is there is no edge guide, but once I got used to it, it’s not really needed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
B
Verified Purchase
Bill
Alexandria, US
★★★★★ 5
Great product, well made, would buy again!
Size: 8" Edger New
Great product, well made, would buy again!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 20, 2026

recommand products

3 Cushion Stone Snowcap Ring - 4.45 cttw
1500.00
Pressure Tubing for CardioPerfect Workstation and CP200
49.99
Tohu Hawke's Bay Merlot 2021
95.94
Alpha Solway FFP3 Mask ASFS-3 - Small - Box of 20
38.99
2.7 Carat Heart Lab Grown Diamond: PC11X602394900
253.50