Helikon-Tex HYBRID OUTBACK PANTS® Regular
SKU: 90035397652

Helikon-Tex HYBRID OUTBACK PANTS® Regular

$80.10 $89.00
Save 10%
No.2 Bestseller on ssadisability.org >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 9 - Jul 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Helikon-Tex HYBRID OUTBACK PANTS® RegularHybrid Outback Pants Robuste Outdoor Hose fr anspruchsvolle Abenteuer Die Hybrid Outback Pants sind fortschrittliche Outdoor Hosen, die sowohl fr lange Bergwanderungen als auch fr ausgedehnte Bivak Abenteuer geeignet sind. Sie bieten eine perfekte Kombination aus Komfort und Langlebigkeit und knnen bei Bedarf durch das Auftragen eines speziellen Wachses teilweise wasserdicht gemacht werden. Die Hose verfgt ber zwei klassische Fronttaschen mit

Hybrid Outback Pants® – Robuste Outdoor-Hose für anspruchsvolle Abenteuer

Die Hybrid Outback Pants® sind fortschrittliche Outdoor-Hosen, die sowohl für lange Bergwanderungen als auch für ausgedehnte Bivak-Abenteuer geeignet sind. Sie bieten eine perfekte Kombination aus Komfort und Langlebigkeit und können bei Bedarf durch das Auftragen eines speziellen Wachses teilweise wasserdicht gemacht werden. Die Hose verfügt über zwei klassische Fronttaschen mit verstärkten Kanten für Messer- oder Lampenclips, zwei vorderseitige Oberschenkeltaschen mit Klettverschluss sowie zwei Reißverschluss-Cargotaschen. Die verstärkten Kniepartien haben innenliegende Taschen, die mit den Low Profile Protective Pads® kompatibel sind.

Eigenschaften:

  • Hybride Konstruktion aus DuraCanvas® und VersaStretch®
  • Wachsimprägnierbar für zusätzlichen Nässeschutz
  • Anatomischer Schnitt ähnlich wie bei den UTP® (Urban Tactical Pants®)
  • Zwei klassische Hüfttaschen mit verstärkten Kanten
  • Zwei vordere Taschen mit Klettverschluss
  • Zwei Cargotaschen mit YKK®-Reißverschluss
  • Elastischer Bund mit Klettverstellung
  • Gürtelschlaufen für Gürtel bis 50 mm Breite
  • Frontseitige Schlaufen für Lanyards
  • Kompatibel mit Low Profile Protective Pads®
  • YKK®-Reißverschlüsse
  • Gewicht: 539 g
  • Material: 65 % Polyester, 33 % Baumwolle, 2 % Elastan

Die Hybrid Outback Pants® bieten außergewöhnliche Vielseitigkeit und Schutz für alle, die sich auf ausgedehnte Outdoor-Abenteuer vorbereiten. Ideal für den Einsatz in rauen Umgebungen


Spezifikationen:

Weight [g] 539

Material 65% Polyester, 33% Cotton, 2% Elastane

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 90035397652

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 2050 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
P
Verified Purchase
Peter Schott
Phoenix, US
★★★★★ 5
Use the best oil to protect your investment
Configuration: 4-Stroke, Size: 1 GA
Great product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 30, 2025
S
Verified Purchase
Steve M.
Chelsea, US
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
N
Verified Purchase
Nancy filippi
Dallas, US
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025
R
Verified Purchase
rich911s
Birmingham, US
★★★★★ 5
Worked for Volvo Penta SX Gimbal Bearing
Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2023
G
Verified Purchase
Greg
Port Orchard, US
★★★★★ 5
Great value
This kit worked perfectly on my Alpha one mercury outdrive. I saw a lot of people mention that it was a hassle to drill the hole when you better have all this alignment stuff. I threw it in use my regular drill drill guide and then the second hole was lined up. Pulling Gimble be very easy. I did have to adjust it up at an angle because my bearing was sitting in their crooked and it came out the second time I made the adjustment to the angle. I would highly recommend this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2024

recommand products

Puig 120NR 3.0 Brems-Kuppl.Satz verfügbar für KAWASAKI Ninja H2 (Type ZXT00N) 2015-
129.00
Puig 120NP 3.0 Brems-Kuppl.Satz verfügbar für DUCATI Supersport 937, S (Type VC) 2017-
129.00
Puig 120NO 3.0 Brems-Kuppl.Satz verfügbar für Aprilia RSV4 1000 RF, RR (Type KE) 2017-
129.00
Puig 120NP 3.0 Brems-Kuppl.Satz verfügbar für DUCATI Multistrada 1200,S (Type A3) 2013-
129.00
Puig 130NA 3.0 Brems-Kuppl.Satz verfügbar für DUCATI Multistrada 1200,S (Type A3) 2015-
129.00