Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
PSS-Dichtung 55 mm Welle, 3 1/4' StevenrohrDie PSS Wellendichtung Typ A ist eine mechanische Gleitringdichtung. Die Dichtflche entsteht zwischen den ebenen Flchen des rotierenden Edelstahlrotors und dem stationren Kohleflansch. Der stationre Kohleflansch wird mit Schlauchklemmen an der Vorderseite des Balges und das hintere Ende des Balges ber das Sternrohr befestigt und wird mit Schlauchklemmen gesichert. Der Edelstahlrotor ist auf der Welle vor dem Kohleflansch montiert. Der Edelstahlrotor
Die PSS Wellendichtung Typ A ist eine mechanische Gleitringdichtung. Die Dichtfläche entsteht zwischen den ebenen Flächen des rotierenden Edelstahlrotors und dem stationären Kohleflansch.Der stationäre Kohleflansch wird mit Schlauchklemmen an der Vorderseite des Balges und das hintere Ende des Balges über das Sternrohr befestigt und wird mit Schlauchklemmen gesichert. Der Edelstahlrotor ist auf der Welle vor dem Kohleflansch montiert. Der Edelstahlrotor wird verwendet, um den Balg zu komprimieren, bevor der Rotor mit Stellschrauben an der Welle befestigt wird. Diese Kompression (Vorspannung) sorgt für einen konstanten Kontakt zwischen den beiden flachen Seiten des Edelstahlrotors und des Kohleflansches. Dadurch kann die PSS Wellenabdichtung die variable Vorwärts- und Rückwärtsbewegung - bedingt durch den Propellerschub - ausgleichen. Der Kohlenstoffflansch ist zum Wellendurchmesser überbohrt, so dass er um die Welle herum 'schwimmen' kann und somit die meisten Fehlausrichtungs- und Schwingungsprobleme ausgleicht. Der Rotor aus rostfreiem Stahl ist durch zwei O-Ringe, die in die Bohrung des Kragens eingelassen sind, gegen die Welle abgedichtet. Diese O-Ringe rotieren mit der Welle und dem Edelstahlrotor und unterliegen keinem Verschleiß während des Betriebs.
Temperaturbegrenzungen: 5°F bis 225°F (-15°C bis 107°C)
Druckgrenzen: 15 PSI (1 BAR)
Grenzwerte für die Wellendrehzahl: 10.000 U/min.
Kohlenstoff-Graphit: Auf 4 HLB geläppt (0,00000044' Toleranz)
316SS / Nitronic 50: Gegenüber 9 Ra
Balgmaterial: Geformtes Nitril - PVC
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 1948 reviews
Sort
Product Reviews
★★★★★ 1
Fits but not great quality
Style: for Saros 10R / Saros 20 / Qrevo CurvX, Style: for Saros 10R / Saros 20 / Qrevo CurvX
I ordered these hoping that they would work in my Saros 10R but I didn't have the greatest experience. It's a nice kit because it has everything you need while the company hasn't fully released all replacement parts yet. However, it seems like the quality is lacking compared to what came with the vacuum.
When I got the kit, I replaced the mop pads, filter in vacuum, side brushes and main rollers. The mop pads are fine and seem to work as good as stock. They are the right size and I don't have any issues with them. The side brushes also seem mostly the same as stock. However, I ran into issues with the filter and the rollers.
I'm including pictures of the filter after one week of use compared to the stock one that has had almost two months of use. It seems like the replacement filter was easily clogged up, whereas the original after two months was clogged in one area. On the back side of the filter, it seemed like the replacement filter was puffy whereas the original was crisp. Even after knocking the replacement around, it seemed like the dust was glued to the filter. These pictures were also taken after the dock "emptied" the vacuum.
I also noticed that when I replaced the rollers, the vacuum made a noise like something was rattling around. I put the original rollers back on and the noise stopped. Tried one more time and it made the rattle. So I just ended up using the stock rollers.
The kit is nice because it has all the parts you need to maintain the vacuum. However, my experience is that it doesn't work as nice as the originals and I ended up going back with the original manufacturer parts.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 21, 2026
★★★★★ 5
Great mopping floor looks clean
Size: Mop Cloth-4
Mop heads are doing a great job. Always buy original ones for the clean look of your floor
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 17, 2026
★★★★★ 5
Get yourself a spare set of mop cloths to keep your Roborock always ready to run
Size: Mop Cloth-5
Does the Roborock do a fantastic job mopping the floor? No, but it does a pretty good job, in fact “good enough.” Even better, the Roborock mops the floor more frequently than I ever did so it stays cleaner, overall.
Definitely get a pack of spare mop cloths so you can have a set being washed while another set is available to put on the mop.
So far, none of the mop cloths have worn out. Given how long they’re lasting, I’m inclined to say it is a decent value for the price paid.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 19, 2025
★★★★★ 5
Fits Saros 10R perfect
Size: Mop Cloth-4
These are great! Fit perfect and might even be fluffier than originals.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 28, 2026
★★★★★ 5
OEM Roborock Cleaning Pads - Do not buy the knock offs.
Size: Mop Cloth-4
These are Roborock OEM pads for my 10R. I tried many of the cheap knock offs and they were terrible. These work great. Highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 22, 2026
recommand products
Prunus cerasifera 'Woodii'
485.00
SKF Zylinderrollenlager NU2218 ECP/C3 Innen-Ø 90 mm Außen-Ø 160 mm ( 8000530664 )
155.00
Prunus yedoensis (x)
865.00
Bosch GWG 12V-50 S Professional Akku Geradschleifer 12 V 6 mm Brushless + 1x Akku 6,0 Ah - ohne Ladegerät
134.94
GAH Ladenband Breite 60 mm Länge 1400 x 60 mm Stärke 8 mm ( 3000200220 )
70.21